Changing BMW wiper blades is a simple task. You can do it yourself in minutes.
Knowing how to change them will save you time and money. BMW wiper blades need regular replacement for clear visibility. Over time, wiper blades wear out and become less effective. This can cause streaks and reduce your view during rain or snow.
Regularly checking and changing your wiper blades is crucial for safe driving. In this blog, you will learn the steps to easily replace your BMW wiper blades. This guide will help you ensure your windshield stays clear and safe. Ready to tackle this simple maintenance task? Let’s get started!
Gather Necessary Tools
You need a few tools to change BMW wiper blades. These include new wiper blades, a small flathead screwdriver, and a pair of gloves. New wiper blades are essential for clear visibility. The small flathead screwdriver helps remove the old blades. Gloves protect your hands from dirt and sharp edges.
Safety is very important. Always turn off your car before changing wiper blades. This prevents accidents. Wear gloves to avoid cuts and bruises. Keep your work area clean and free of obstacles. Make sure your car is on a flat surface. This helps you work safely.
Credit: www.reddit.com
Identify Wiper Blade Type
Different BMW models use different wiper blades. There are three main types: conventional blades, beam blades, and hybrid blades. Conventional blades have a metal frame and are common. Beam blades are sleek and have no frame. Hybrid blades are a mix of both.
Check your car manual to find the right type. You can also measure the old blades. Make sure to get the correct size. Using the wrong size can cause problems. Visit a local auto store for help. They can find the right blades for you.
Remove Old Wiper Blades
First, gently lift the wiper arm away from the windshield. Ensure it stays in a vertical position. Be careful not to let it snap back. This could damage the windshield.
Find the small tab or button on the wiper blade. Press it to release the blade. Slide the blade downwards to remove it from the arm. Hold the arm carefully. Avoid letting it hit the windshield.
Prepare New Wiper Blades
Changing BMW wiper blades is a quick and easy task. Lift the wiper arm, release the old blade, and attach the new one. Ensure the new blades fit securely before lowering the wiper arm back in place.
Unpack New Blades
Carefully open the new wiper blades package. Take out the blades. Check the blades for all parts. Ensure all parts are there. Look at the wiper blades closely. Make sure there is no damage.
Inspect For Damage
Check the new blades for any cracks. Look for any bends. Ensure the rubber is smooth. No cracks or splits should be there. The metal parts should be straight. No rust or bends should be visible. Ensure all clips and attachments are intact.
Install New Wiper Blades
Slide the new blade into the wiper arm. Make sure it clicks. This means it’s in the right place. Check the fit. The blade should be snug.
Push the clip until it locks. Test the blade. Wiggle it to be sure. It should not move. Finally, lower the wiper arm back onto the windshield.
Credit: www.youtube.com
Test New Wiper Blades
Changing BMW wiper blades is simple and quick. Lift the wiper arm, remove the old blade, and snap in the new one. Ensure the blade locks securely before lowering the arm back onto the windshield.
Check For Proper Installation
Make sure the new wiper blades are fixed well. They should not be loose. Gently pull on the wipers. They should stay in place. Turn on the wipers. They should move smoothly. Check if they clean the windshield well. No streaks should be left. If you see streaks, adjust the blades. Recheck the installation.
Ensure Smooth Operation
Turn on the wiper switch. Watch the blades as they move. They should move without any noise. Listen for any squeaks. The wipers should clear water from the windshield. No spots should be left behind. Test them with water spray. Ensure they work at different speeds. Check both slow and fast settings. Everything should be smooth and clear.
Maintenance Tips
Replacing BMW wiper blades is simple. Lift the wiper arm, unclip the old blade, and attach the new one. Ensure it clicks into place.
Extend Blade Life
Keep your wiper blades clean. Wipe them with a damp cloth. This removes dirt and grime. Check the blades regularly. Look for cracks or splits. Park in the shade. Sunlight can damage the rubber. Lift the blades during winter. This stops them from freezing to the windshield. Replace blades every 6-12 months. This ensures they work well.
Signs Of Wear And Tear
Watch for streaks on your windshield. This means the blades are worn. Listen for sounds. Squeaking or chattering is a bad sign. Look for cracks in the rubber. This shows damage. Check for bent frames. This can happen in heavy weather. Notice poor visibility. If the view is unclear, change the blades. Inspect the metal. Rust or corrosion means it’s time for new blades.
Credit: www.e90post.com
Conclusion
Changing BMW wiper blades is simple and quick. Follow the steps outlined. Ensure you have the correct replacement blades. Lift the wiper arms gently to avoid damage. Securely attach the new blades. Test them to make sure they work properly.
Regular maintenance ensures clear visibility and safe driving. Now, you’re ready to handle this task with confidence. Save time and money by doing it yourself. Enjoy clear, streak-free windows on your next drive.