Safelite wiper blades are designed to provide optimal visibility and performance in all weather conditions. However, there may come a time when you need to replace them due to wear and tear or to install new ones.
In this guide, we will walk you through the steps on how to remove Safelite wiper blades.
Step 1: Position the wiper blades
Start by parking your vehicle and ensuring that the wiper blades are in an upright position. This will prevent any accidental damage to the windshield during the removal process.
Step 2: Lift the wiper arm
Locate the wiper arm, which is the metal component connected to the wiper blade. Lift the wiper arm away from the windshield, extending it away from the vehicle.
Step 3: Locate the release tab
Look for the release tab, typically found near the middle of the wiper blade. This tab allows you to detach the wiper blade from the wiper arm. It may be in the form of a small lever or a button.
Step 4: Activate the release tab
Activate the release tab by pressing or lifting it, depending on the type of mechanism present. This will disengage the wiper blade from the wiper arm, allowing for easy removal.
Step 5: Remove the wiper blade
With the release tab activated, gently pull the wiper blade away from the wiper arm. Apply a small amount of pressure if necessary, but avoid excessive force to prevent any damage.
Step 6: Repeat the process
Repeat steps 2 to 5 for the second wiper blade on the opposite side of the windshield. Ensure that both blades are removed before proceeding with the installation of new wiper blades.
Credit: www.amazon.ae
Step 7: Inspect the wiper arms
Before installing the new wiper blades, take a moment to inspect the wiper arms for any signs of damage or debris. Clean them if necessary to ensure smooth operation of the new blades.
Step 8: Install the new wiper blades
Refer to the manufacturer’s instructions to install the new Safelite wiper blades. Line up the adapter with the wiper arm and slide the new blade into position. Ensure that it is securely attached before moving on to the next step.
Step 9: Lower the wiper arms
Lower the wiper arms gently back onto the windshield, ensuring that the new wiper blades make proper contact with the glass. Test the wipers to ensure they are functioning correctly.
Credit: www.youtube.com
Step 10: Regularly maintain your wiper blades
To maximize the lifespan and performance of your Safelite wiper blades, it is important to regularly maintain them. Clean the blades with a soft cloth and windshield washer fluid to remove any dirt or debris that may accumulate over time.
Conclusion
Removing Safelite wiper blades is a relatively simple process that can be done by following these easy steps. By taking the time to replace worn-out blades with new ones and maintaining them regularly, you can ensure clear visibility and safe driving conditions, no matter the weather.