How to Replace a Glow Plug: Simple Step-by-Step Guide

Diesel trucks rely on glow plugs for reliable cold starts, especially in winter. If you’ve ever sat waiting for the engine to fire, you know the frustration. In this guide we’ll walk you through the visual steps, tools, and safety checks.

As of 2026 most OEM manuals specify a torque of 5, 7 Nm for the new plug. Let’s get you back on the road quickly and safely.

How to Replace a Glow Plug

To replace a glow plug, disconnect the battery first. Locate the plug using the engine bay diagram. Remove it with the correct socket and install the new one.

Torque the new plug to the OEM specification. Clear fault codes and verify cold‑start operation.

Step‑by‑Step Visual Replacement Guide

A clear view of the engine bay prevents mis‑location and damage. Follow the visual cues in your service manual and keep tools organized. Use the table below to gather everything before you start.

Item Spec Note
Glow plug socket 12 mm or 14 mm Match your vehicle
Extension bar 6 in For tight spaces
Torque wrench 5–7 Nm range OEM spec
Anti‑seize Ceramic safe Prevent corrosion
OBD‑II scan tool Any brand Clear codes
  1. Disconnect the negative battery terminal and wait 30 seconds.
  2. Locate the glow plug near the intake manifold; refer to the engine bay photo.
  3. Insert the socket onto the plug, turn counter‑clockwise until free.
  4. Inspect the socket for wear; clean or replace if needed.
  5. Apply a thin layer of anti‑seize to the new plug threads.
  6. Hand‑tighten the new plug, then torque to the OEM value using the wrench.
  7. Reconnect the battery and use a scan tool to clear fault codes.
  8. Start the engine; listen for the glow plug click and verify smooth idle.

For exact dimensions see the Bosch glow plug specifications.

Common Mistakes & Safety Warnings

Stripping the plug threads is a frequent error; use the proper socket size. Corroded terminals cause poor connection; clean with a wire brush before re‑install. Working on a hot engine can cause burns; let the engine cool for 15 minutes.

Battery disconnect is essential; ignoring it may create shorts. Avoid using starter fluid near hot components; it can ignite.

Always wear eye protection when removing plugs. Follow OSHA battery handling guidelines for safe disconnect and reconnect.

Comparison & Best‑Fit Options

Choosing between OEM and aftermarket plugs depends on budget and warranty. The table compares three popular options.

Brand Heat Range Warranty Typical Price
Bosch (OEM) Quick‑glow 2 s 2 yr $45
Denso Quick‑glow 2 s 1 yr $35
NGK Slow‑glow 4 s 1 yr $30

OEM Bosch offers the longest warranty and matches the original design, ideal for fleet managers. Aftermarket Denso provides solid performance at a lower cost, suitable for DIY owners. NGK’s slow‑glow design works well in milder climates and is the most economical.

For insight on cost versus durability, see the analysis in “Are More Expensive Tie Rod Ends Worth It”.

Frequently Asked Questions

How often should glow plugs be replaced?

Most manufacturers recommend replacement every 60,000, 100,000 mi or when cold‑start issues appear. Regular inspection during routine service catches wear early.

What are the signs a glow plug is failing?

Symptoms include longer crank times, rough idle, and a illuminated check‑engine light. A scan tool may show fault code P0670.

Can I replace a glow plug without a scan tool?

You can remove and install the plug without a scan tool, but you’ll need a scan tool to clear fault codes afterward.

Do I need special tools for tight engine bays?

A 12 mm or 14 mm socket with a 6‑in extension covers most applications. An impact wrench can speed removal but isn’t required.

How much does a glow plug replacement cost at a dealer?

Dealer labor runs $80, $120 plus the plug price; DIY saves roughly $40, $60 per plug. For typical lug nut pricing, see “How Much Do Lug Nuts Cost”.

Scroll to Top