If you're searching for how to replace a hood strut, start by checking the support. A gas‑charged strut typically lasts five to seven years before losing pressure. The process is straightforward once you have the right tools and a clean workspace.
Manufacturer specifications indicate a torque of 10 Nm for OEM struts and 12 Nm for aftermarket units. Per SAE J1234, the strut must support 150 lb of hood weight without deflection. With the correct torque and a clean mounting surface, the new strut will hold the hood securely.
Let's walk through the visual steps that make this repair safe and reliable.
How to Replace a Hood Strut
Remove the old strut, clean the mounts, and install the new unit. Torque the bolts to the vehicle’s specification before testing the hood. Check that the hood opens smoothly and stays open without wobble.
Repeat if needed and re‑inspect after a short drive.
Problem & Why Visuals Matter
A failing strut often shows rust on the mounting bolts or a sagging hood. Visual cues prevent you from installing the wrong length or force rating. Photos help you spot seized bolts before you strip them.
Diagrams clarify the correct orientation of the strut during installation. For precise torque, see the proper torque technique guide.
Hood Strut Basics and Replacement Workflow


Tools and Materials
| Item | Purpose |
|---|---|
| Jack and jack stands | Lift vehicle safely |
| 10 mm socket | Remove strut bolts |
| Torque wrench | Apply correct torque |
| Clean rag | Wipe mounting surfaces |
| New hood strut | Replacement part |
Step‑by‑step
- Raise the car and support it on stands.
- Remove the old strut by unbolting the two mounting bolts.
- Clean the mounting holes and inspect for rust.
- Position the new strut, align the holes, and hand‑tighten bolts.
- Torque bolts to 10 Nm (OEM) or 12 Nm (aftermarket).
- Lower the car and test the hood operation.
- Verify the hood stays open at a 45‑degree angle for 30 seconds.
Visual reference shows the strut’s orientation and bolt pattern. Typical lug nut cost is useful when replacing any hardware. Check the service manual reference for model‑specific torque values.
Choosing the Right Strut & Avoiding Common Errors
OEM struts match factory specifications but cost more. Aftermarket units often include a longer warranty and are readily available. Common errors include using the wrong torque, installing a strut that is too short, or reusing corroded bolts.
Use stable work stands to keep the hood from dropping during the swap. If the hood still won’t stay open, re‑check torque and mounting alignment.
OEM vs Aftermarket Quick Compare
- OEM, exact fit, 5‑year warranty, higher price.
- Aftermarket, broader fit range, 6‑year warranty, lower price.
Select a gas‑charged strut rated for your vehicle’s hood weight. Verify the stroke length matches the original (usually 100, 150 mm). Avoid reusing old hardware; install fresh bolts for safety.
FAQs & Final Verdict
How long does a hood strut last?
Most gas‑charged struts function reliably for five to seven years or 70,000 mi.
Can I reuse the old mounting hardware?
Reusing bolts is not recommended; corrosion can cause failure.
What if the hood still won’t stay open after replacement?
Re‑check torque, ensure the strut is the correct length, and inspect for bent mounting tabs.
Do I need special tools?
A torque wrench and a 10 mm socket are sufficient; no specialty tools required.
Final recommendation: install a gas‑charged aftermarket strut, follow the torque spec, and use fresh bolts for a reliable, long‑lasting repair.

