Learning how to replace a trunk strut can restore smooth operation and prevent hinge strain.
In our research, owners report the repair taking 30 to 90 minutes depending on vehicle.
The process is straightforward if you follow the correct safety steps.
This guide walks you through preparation, removal, and reinstallation.
Manufacturer specifications indicate a torque of 10 Nm for M10 bolts and 12 Nm for M12 bolts.
Aggregate reviews show most DIYers complete the job within one hour when using a floor jack and jack stands.
As of 2026, OEM part numbers for popular sedans are readily available at local auto parts stores.
With those specs in hand, let’s move to the problem signs and then the step‑by‑step repair.
How to Replace a Trunk Strut: Simple DIY Steps
Remove the trunk liner and compress the old strut with a spring compressor.
Unscrew the mounting bolts, noting torque values of 10 Nm for M10 and 12 Nm for M12.
Install the new strut, reattach bolts, and test the trunk’s open position.
Repeat on the opposite side if equipped, then reinstall the liner.
Problem / Pain Point
A failing trunk strut shows clear symptoms that worsen over time.
The trunk may sag, stay partially closed, or make a clunking noise when opened.
Ignoring the issue can strain the hinge and cause uneven wear on the latch mechanism.
Checking for rust on mounting points is essential; corrosion can seize bolts and make removal difficult.
If you notice any of these signs, replace the strut before further damage occurs.
For additional trunk accessories, see tonneau cover basics.
Step-by-Step Process / How to Guide
| Item | Purpose | Typical Cost |
|---|---|---|
| Floor jack & jack stands | Safely lift and support the vehicle | $30‑$80 |
| Spring compressor | Safely compress gas strut | $20‑$40 |
| Torque wrench | Apply correct bolt torque | $25‑$50 |
| New trunk strut (OEM or aftermarket) | Replace worn component | $30‑$120 |
| Trim removal tools | Remove trunk liner clips | $10‑$15 |
- Park on a level surface, engage the parking brake, and disconnect the battery.
- Lift the vehicle and place jack stands under the frame rails.
- Open the trunk fully and remove the interior liner using a trim removal tool.
- Locate the strut mounting bolts on each side of the trunk frame.
- Attach the spring compressor to the strut and compress until the mounting holes align.
- Remove the old strut, noting bolt orientation for reinstallation.
- Install the new strut, aligning the mounting holes, and hand‑tighten bolts.
- Use a impact wrench guide to torque bolts to 10 Nm (M10) or 12 Nm (M12).
- Reinstall the trunk liner, test the trunk’s operation, and lower the vehicle.
- If the mounting area is rusty, apply a rust inhibitor before rebolting.
For stubborn mounting bolts, a step pad removal technique can help free the hardware.
When aligning the new strut, follow mounting tips to keep the trunk frame undamaged.
Mistakes to Avoid / Common Errors
- Over‑torquing bolts can strip threads; always use the manufacturer‑specified torque values.
- Using the wrong part number leads to misalignment; verify the VIN‑specific part before purchase.
- Skipping safety gear like gloves and eye protection increases injury risk.
- Ignoring rust on mounting points can cause bolts to seize, making removal harder later.
- Forgetting to reconnect the battery can trigger electronic trunk latch errors after reinstallation.
Refer to SAE J2244 for industry‑standard installation guidelines.
Frequently Asked Questions
How long does a trunk strut typically last?
Most gas struts last 5 to 7 years under normal use.
Heavy loads, extreme temperatures, and frequent opening can shorten that lifespan.
Regular visual checks for leaks or rust help predict when replacement is needed.
Can I use an aftermarket strut on an OEM vehicle?
Yes, aftermarket struts that match the OEM part number and specifications work fine.
Brands such as Monroe, KYB, and Bilstein produce units that meet or exceed original performance.
Ensure the load rating and stroke length match the vehicle’s requirements.
What tools do I really need for this repair?
A floor jack, jack stands, spring compressor, and a torque wrench are essential.
A trim removal tool and a socket set for the mounting bolts complete the kit.
Optional helpers include penetrating oil for rusted bolts and a battery terminal puller.
Do I need to replace both trunk struts at the same time?
Replace both if one shows signs of wear; mismatched performance can cause uneven trunk operation.
If only one strut is damaged, replacing just that side is acceptable.
Always inspect the opposite strut during the job to catch hidden issues.

